Daten werden übertragen...

The proper fabricating of Solid Surface

Special tools for proper fabricating of Corian, Staron, HiMacs, Plexicor, Rausolid, GetaCore, Marlan, Swanstone, Avonite ... all (c)


Module 01 - Formatting

Sawblades - Mod.01

2 pcs. sawblades C92.1
300/4/30mm Z96 CORGEM
EUR 398.00
excl. VAT., ex factory
Quantity :
Module 02 - Inserting sinks

Inserting bowls - Mod.02

C02.12 cutter D=12mm
C02.1 cutter 15°
C02.2 cutter profile depht 4mm
C02.3 cutter profile depht 2mm
EUR 325.00
excl. VAT., ex factory
Quantity :
Module 03 - undermounting sinks

Undermounting sinks - Mod.03

C02.10 cutter D=10mm
C08.1 cutter R=12.5/7°
C08.2 cutter R=12.5/4°
C08.3 cutter R=12.5/15°
BeckenChecker to select proper cutter
EUR 515.00
excl. VAT., ex factory
Quantity :
Module 04 - glueing joints

Junctions - Mod.04

C12.1 cutter 'male'
C12.2 cutter 'female'

EUR 202.00
excl. VAT., ex factory
Quantity :
Module 05N - soap trays

Soap-trays New - Mod.05N

C14.4 template-set
C14.5 cutter profile depth 5mm

EUR 225.00
excl. VAT., ex factory
Quantity :

Drainboards - Mod.06

C05.6 cutter R=12.5mm
WAF-8: The albinkaus-sledge for easy-to-make drainboards!

Faster and easier compared to a CNC-machine! Available with or without engine block of AK8-G milling machine.


Watch also the VIDEO (Please deactivate flash-blocker)

EUR 1,180.00
excl. VAT., ex factory
Quantity :
Module 07 - Bullnose-Front

Bullnose-edges - Mod.07

C04.6 cutter D=12mm * CL 42mm
C03.2 cutter
C03.55 cutter R=5.5mm
C03.4 cutter
C01.7 cutter

EUR 512.00
excl. VAT., ex factory
Quantity :
Module 08 - round edges

Rounded edges - Mod.08

C06.1 cutter R=12.5mm
C06.2 cutter R=12.5mm
C06.3 cutter R=19mm
C06.4 cutter R=19mm
C06.5 cutter R=20mm
C06.6 cutter R=25mm

EUR 859.00
excl. VAT., ex factory
Quantity :
Module 09 - profiled edges

Profiled edges - Mod.09

C02.4 cutter
C10.3 cutter CL=40mm
C01.6 cutter CL=40mm
C15.1 cutter 10x45°
C15.2 cutter for rebate 15mm

EUR 669.00
excl. VAT., ex factory
Quantity :
Module 11 - inserting cookers

Electric/gas cookers - Mod.11

C11.9 solid-carbide-cutter D=12x45mm/3-flute
C11.1 cutter

EUR 245.00
excl. VAT., ex factory
Quantity :
Module 12 - hot pot areas with inox rods

Rustfree-steel-bars - Mod.12

C11.2 solid-carbide-cutter
C11.3 precision-templates
(one of each half-moon, ellipse, circle)
C11.4 rustfree-steel-bars

EUR 295.00
excl. VAT., ex factory
Quantity :
Module 12K - hot pot areas with inox buttons

Stainless-steel-buttons - Mod.12K

C11.6 stainless-steel-bars
C11.5 drilling-tool (21 pieces)

EUR 245.00
excl. VAT., ex factory
Quantity :
Module 13 - decorative inlays

Decorative inlays - Mod.13

C02.12 cutter D=12mm
C02.1 cutter 15°
C02.7 planer

EUR 245.00
excl. VAT., ex factory
Quantity :

Coved backsplash - Mod.14

Set 'expert':
AK-8G backsplash router
C03.3 cutter R=7mm
C03.6 cutter R=6.3mm
C03.7 cutter R=11mm
C03.8 cutter R=14mm
C09.1 cutter for rebate
AK-ALSYS-R6 guiding unit for C03.6

Watch also the VIDEO (Please deactivate flash-blocker)
It shows the backsplash-router AK-8G in action

EUR 2,590.00
excl. VAT., ex factory
Quantity :
Backsplash with Radius 3mm

Hohlkehlen R3 - Mod.14R3

Instead of ugly and unhygienic silicone joints:
Easily produce elegant coves with a radius 3mm with this set of cutters using your AK-8G.
EUR 310.00
excl. VAT., ex factory
Quantity :

Easy alignment - PosiVac

The awesome block for justifying stripes when setting up for a coved backsplash.
Body including 4x2 distance-plates in different sizes colormatched with the routers.

Watch also the VIDEO (Please deactivate flash-blocker)
EUR 280.00
excl. VAT., ex factory
Quantity :
vertical support for AK-8G

Vertical support - AK-VT

Vertikal table for AK-8G

EUR 390.00
excl. VAT., ex factory
Quantity :

Your perfect router - AK-OF

Powerful 2600W, elektronically adjustable, strong Motor
Awarded  with the Golden Securitas 2010 !
The completely new designed baseplate 'FreAK' beside the possibility to cut nearly free of dust gives you three further advantages:
  • extended base for safer guding
  • two ways of dust absorption, easily selectable with one integrated lever
  • guide-change without any further tools

Watch the VIDEO! (Please deactivate flash-blocker)

EUR 1,270.00
excl. VAT., ex factory
Quantity :
Module 18 - overflow

Overflow drills - Mod.18

Make a profiled hole by using the drill C18.1.


Three sizes of drill-bits available:
C18.1 D = 36.5mm
C18.2 D = 35.4mm
C18.3 D = 22.5mm

Module 19 - repair-set

Repair-Set - Mod.19

C19.1 drill-bit for chamfer
C19.2 drill-bit for plugs
C19.3 drill-bit 35mm

1. Drill the plug with C19.2
2. Drill the hole using C19.3
3. Cut the face with C19.1
4. Insert plug
5. Plan and sand - DONE!

EUR 379.00
excl. VAT., ex factory
Quantity :
Insert an elliptic stripe

Repair-set for AK-8G - Mod.19A

C15.3 cutter 20mm for AK-8G
C19.6 stripe-cutter
C19.7 baseplate for AK-8G
EUR 399.00
excl. VAT., ex factory
Quantity :
Module 19G

Repair using Lamello(R) - Mod.19G

C19.13 groove cutter 100mm
C19.14 profile cutter D38

EUR 399.00
excl. VAT., ex factory
Quantity :
Repair 3mm / Module 19G

Repair-Set 3mm - Mod.19K

C19.4
C19.5
C02.7
EUR 329.00
excl. VAT., ex factory
Quantity :
Repair-set module 19N

Repair-Set - Mod.19N

Useful set of cutters to repair faulty joints.
Depending on the situation you may cut the groove either with the straight cutter C19.10 or with the disk-cutter C19.11.
Shape the counter-piece using C19.12 and cut it off with a sawblade, glue, sand - done!
EUR 275.00
excl. VAT., ex factory
Quantity :
Module 20A - Rebate

Thermoformed sinks - rebate - Mod.20A

Toolset for mounting thermoformed sinks

Cutting the rebate and measuring the bowls angle
C02.10 cutter D=10mm
C15.2 cutter for rebate 15mm
C02.3 cutter for the groove

EUR 295.00
excl. VAT., ex factory
Quantity :
Module 20B

Thermoformed sinks - rebate - Mod.20B

Toolset:

C08.LBK  NL 25 / 3°
C08.LBU  NL 25 / 7°
C08.LBR  NL 25 / 15°
BeckenChecker

EUR 365.00
excl. VAT., ex factory
Quantity :
Module 20F - Chamfer for thermoformed sinks

Thermoformed sinks Face - Mod.20F

Module 20F - Chamfer

3 cutters with different angles fitting different types of thermoformed sinks
C08.LFK 3° (Mixa...)
C08.LFU 7° (Lavanto Uno and Grande...)
C08.LFR 15° (Lavanto Rotondo, Vivari VR37)
Sink-Checker (angle-check)
EUR 365.00
excl. VAT., ex factory
Quantity :
Module 20R - Radius for thermoformed sinks

Thermoformed sinks Radius - Mod.20R

4 cutters with different angles fitting different types of thermoformed sinks
C08.LRK 3° (MIXA...)
C08.LRU 7° (LAVANTO UNO and GRANDE...)
C08.LRR 15° (LAVANTO ROTONDO, VIVARI VR 37)
C08.F5 20° R=5mm! (FONTANA)
Sink-Checker (angle check)

EUR 479.00
excl. VAT., ex factory
Quantity :
Module 24 - Cutting flush and rounding

Cutting flush and rounding - Mod.24

C10.2 cutter R=10mm
C10.5 cutter R=2mm
C10.6 cutter R=3mm
C10.7 cutter R=5mm
C10.8 cutter R=8mm

EUR 549.00
excl. VAT., ex factory
Quantity :

Basin outlets - Mod.25

C18.4 D=46mm
C18.5 D=90mm
EUR 550.00
excl. VAT., ex factory
Quantity :

The complete Tool-Set - KompKit

All tools from all modules mentioned above together in one movable Flightcase give you best possibilities to fabricate solid surface materials like Corian, Staron, Avonite, HiMacs etc properly:

clear - No effort for searching
complete - everything available immediatly, even for unexpected needs
conveniant - easy access, easyly cleared away, lockable

Pivot-router - AK-SF

With albinkraus' new pivot-router AK-SF you can do the face milling of any squared bowl with angles between 23° and 90°.

Watch also the VIDEO! (Please deactivate flash-blocker)

EUR 840.00
excl. VAT., ex factory
Quantity :
System workplace - the anti-chip solution

The solution against dust - System-Arbeitsplatz

Suction-mobile with beam and MAFELL milling machine with FreAK-base. Cable and hose from above: Liberty of action!
  • clean, save, functional, mobile
  • milling nearly free of dust
  • good sight onto the workpiece
  • shatter protection
  • reversible way of suction for full power of suction in every routing situation
  • very simple changing of copy rings with magnet holding
  • safe routing due to table extension
  • high benefit, fair price

Pricing in EUR ex factory, excl. VAT - given prices only valid within EU