The proper fabricating of Solid Surface
Special tools for proper fabricating of Corian, Staron, HiMacs, Plexicor, Rausolid, GetaCore, Marlan, Swanstone, Avonite ... all (c)
Drainboards - Mod.06
C05.6 cutter R=12.5mm
WAF-8: The albinkaus-sledge for easy-to-make drainboards!
Faster and
easier compared to a CNC-machine! Available with or without engine block
of AK8-G milling machine.
Watch also the VIDEO (Please deactivate flash-blocker)
Coved backsplash - Mod.14
Set 'expert':
AK-8G backsplash router
C03.3 cutter R=7mm
C03.6 cutter R=6.3mm
C03.7 cutter R=11mm
C03.8 cutter R=14mm
C09.1 cutter for rebate
AK-ALSYS-R6 guiding unit for C03.6
AK-ALSYS-R6 guiding unit for C03.6
Watch also the VIDEO (Please deactivate flash-blocker)
It shows the backsplash-router AK-8G in action
Your perfect router - AK-OF
Powerful 2600W, elektronically adjustable, strong Motor
Awarded with the Golden Securitas 2010 !
The completely new designed baseplate 'FreAK' beside the possibility
to cut nearly free of dust gives you three further advantages:
- extended base for safer guding
- two ways of dust absorption, easily selectable with one integrated lever
- guide-change without any further tools
Watch the VIDEO! (Please deactivate flash-blocker)
Repair-Set - Mod.19N
Useful set of cutters to repair faulty joints.
Depending on the situation you may cut the groove either with the straight cutter C19.10 or with the disk-cutter C19.11.
Shape the counter-piece using C19.12 and cut it off with a sawblade, glue, sand - done!
Thermoformed sinks Face - Mod.20F
Module 20F - Chamfer
3 cutters with different angles fitting different types of thermoformed sinks
C08.LFK 3° (Mixa...)
C08.LFU 7° (Lavanto Uno and Grande...)
C08.LFR 15° (Lavanto Rotondo, Vivari VR37)
Sink-Checker (angle-check)
Thermoformed sinks Radius - Mod.20R
4 cutters with different angles fitting different types of thermoformed sinks
C08.LRK 3° (MIXA...)
C08.LRU 7° (LAVANTO UNO and GRANDE...)
C08.LRR 15° (LAVANTO ROTONDO, VIVARI VR 37)
C08.F5 20° R=5mm! (FONTANA)
Sink-Checker (angle check)
The complete Tool-Set - KompKit
All tools from all modules mentioned above together in one movable Flightcase give you best possibilities to fabricate solid surface materials like Corian, Staron, Avonite, HiMacs etc properly:
clear - No effort for searching
complete - everything available immediatly, even for unexpected needs
conveniant - easy access, easyly cleared away, lockable
The solution against dust - System-Arbeitsplatz
Suction-mobile with beam and MAFELL milling machine with FreAK-base. Cable and hose from above: Liberty of action!
- clean, save, functional, mobile
- milling nearly free of dust
- good sight onto the workpiece
- shatter protection
- reversible way of suction for full power of suction in every routing situation
- very simple changing of copy rings with magnet holding
- safe routing due to table extension
- high benefit, fair price
Pricing in EUR ex factory, excl. VAT - given prices only valid within EU